ade
Member
Dear All,
I have a problem with Panel View PV1000 Color, I'm currently using 370 tags in my PV1000, and using 53 tags to trigger alarm messages, all 53 tags also used for single bit multi state indicator for Annunciator in one page of PV1000. PV1000 is linked to 3 SLC 5/04s via DH+
All 53 tags has been configured.
When I make a simulation to trigger alarm by activate switch sensor on one of the SLC's input, the multistate indicator is indicating the correct tag (PLC address), but in the alarm list and alarm banner, they are indicating the wrong message as I've made....
Can any one help me please....
best regards,
ade
I have a problem with Panel View PV1000 Color, I'm currently using 370 tags in my PV1000, and using 53 tags to trigger alarm messages, all 53 tags also used for single bit multi state indicator for Annunciator in one page of PV1000. PV1000 is linked to 3 SLC 5/04s via DH+
All 53 tags has been configured.
When I make a simulation to trigger alarm by activate switch sensor on one of the SLC's input, the multistate indicator is indicating the correct tag (PLC address), but in the alarm list and alarm banner, they are indicating the wrong message as I've made....
Can any one help me please....
best regards,
ade