Hi everybody!
I'm using a CPU 319 3PN-DP (318-3EL00-0AB0) to establish a simple communication with my PC. I have read the example for configuring PROFINET network using a CPU 317 2PN-DP. This requires a SCALANCE in which a PC and a CPU 317 2PN-DP plugged. Is it the same with CPU 319 3PN-DP. I have linked directly my PC to the CPU by an ETHERNET cable. Power supply had been switched on before. However, nothing happened. The symptoms are: the DC 5V on the CPU was ON, the STOP Led blinked every approx 2 seconds and my PC reported: 'network cable is unplugged'.
I hope to hear from u soon!
Kind regards,
I'm using a CPU 319 3PN-DP (318-3EL00-0AB0) to establish a simple communication with my PC. I have read the example for configuring PROFINET network using a CPU 317 2PN-DP. This requires a SCALANCE in which a PC and a CPU 317 2PN-DP plugged. Is it the same with CPU 319 3PN-DP. I have linked directly my PC to the CPU by an ETHERNET cable. Power supply had been switched on before. However, nothing happened. The symptoms are: the DC 5V on the CPU was ON, the STOP Led blinked every approx 2 seconds and my PC reported: 'network cable is unplugged'.
I hope to hear from u soon!
Kind regards,