snaggletto
Member
OP
- Join Date
- Jul 2004
- Posts
- 61
Thanks for the info Pinworm21. Let me soak this one up a bit and I'll get back with 'intelligent' questions.
Let me ask this though, you have "air cyl out 1" as the output at then end of rung 1. You also have "air cyl out 1" in the sub branch but as a contact, or input. Is it normally allowable to have the same names of inputs and outputs, even if the actual memory registers are different? Why I'm asking is due to the free Entertron PLC programming software I have. It has an offline simulator, when creating labels for inputs and outputs etc... it complains about the name not being unique. Is this just something weird about Entertron's software or what?
Let me ask this though, you have "air cyl out 1" as the output at then end of rung 1. You also have "air cyl out 1" in the sub branch but as a contact, or input. Is it normally allowable to have the same names of inputs and outputs, even if the actual memory registers are different? Why I'm asking is due to the free Entertron PLC programming software I have. It has an offline simulator, when creating labels for inputs and outputs etc... it complains about the name not being unique. Is this just something weird about Entertron's software or what?