We have 5 machines that use compact logix all with PVP 600. never have I had a problem with any of them. Until today. certain data is not being xfered to/from the PV while other is fine. I wanted to look at the PV program and make sure nothing has been changed without my knowledge in the PV tags or perhaps in the Compactlogix program tags either. So i used the tranfer wizard, downloaded the program from the PV+ to the laptop via Ethernet. success!! now to open the program in Factory talk studio. no dice! error comes up "unable to load application" i can open the project in FT view ME and it will run. but why can I not open it in Studio to actually see what tags are what?
I am running FT studio V5.00 CPR9.
oh let me mention that i have no issues with viewing other PVP programs that we have with this software.
Any help is greatly appreciated my head hurts from banging it against the table!!!
I am running FT studio V5.00 CPR9.
oh let me mention that i have no issues with viewing other PVP programs that we have with this software.
Any help is greatly appreciated my head hurts from banging it against the table!!!