I have to change out a 311 communications module, in a 90-30 series rack. My question is 'If I replace this module with the new one, will I need to get into the program to do any type of set-up'?
It is for a machine that is running, and communicates with a HMI device of the type I'm not sure of at this time. I am using VersaPro software. Can I connect to the CPU, and upload the program, without having any offline program?
Any help, or suggestions, with GEFanuc, would be appreciated. Where to find manuals, without having to go through the hassle of signing up to GE, would also be of big help.
Thanks
It is for a machine that is running, and communicates with a HMI device of the type I'm not sure of at this time. I am using VersaPro software. Can I connect to the CPU, and upload the program, without having any offline program?
Any help, or suggestions, with GEFanuc, would be appreciated. Where to find manuals, without having to go through the hassle of signing up to GE, would also be of big help.
Thanks