Help with translation

[sva1240]

Hey guys... I'm new to this forum and looking for help

I have code that is in ladder diagram and trying to translate it to function blocks diagram but is not working as ladder , so wondering any one have an idea what this code will be in function blocks .. and I will appreciate that.

 

[Mickey]

I am not a function block programmer but you will have to tell the forum which PLC (brand/model) you are using. Brand "A" function block programming will be different then brand "B".

https://www.google.com/search?q=fun...0CCsQsARqFQoTCOeGgsr1o8cCFcaMDQod-UwMwg&dpr=1

 

[sva1240]

I use Allen Bradley studio 5000

 

[boneless]

Hi and welcome!

 

[boneless]

I missed your second post, but it should be quite similar in Studio 5000. The commands should be similar to your original.

 

[sva1240]

I missed your second post, but it should be quite similar in Studio 5000. The commands should be similar to your original.

Thank you so much

 

[jdbrandt]

Hey guys... I'm new to this forum and looking for help

I have code that is in ladder diagram and trying to translate it to function blocks diagram but is not working as ladder , so wondering any one have an idea what this code will be in function blocks .. and I will appreciate that.

Unless there is a type-o in the LIGHTS (are there two, or three?), the GRT in the last rung is not needed.

 

[Jeev]

I hate to harp on an age-old point, but only put multiple coils before the OSR if you really intend it to work that way. Otherwise use separate branches and OSRs for the triggering conditions.