nyameephraim
Member
Hi, dear experts please i wish to design an HMI for this project. i uploaded the file from PLC so is not documented. but i got some basic supporting documents.
the program was written in a bit complex manner base on my scope.
now i need some orientation on how to approach this issue, first i need to identify some of the instructions from the ladder logic diagram that are required for me to design this HMI.
I know it requires patient to put a helping hand to this, (i appreciate)
while i consider it a way of building good experience
http://forums.rockwellautomation.com/posts/5e083e28ab?commentId=42554#42554
thanks
the program was written in a bit complex manner base on my scope.
now i need some orientation on how to approach this issue, first i need to identify some of the instructions from the ladder logic diagram that are required for me to design this HMI.
I know it requires patient to put a helping hand to this, (i appreciate)
while i consider it a way of building good experience
http://forums.rockwellautomation.com/posts/5e083e28ab?commentId=42554#42554
thanks