Tom@Pton
Member
I am using a ML1400 via a local network with a C-More HMI.
The operator has stated a couple times now that the indicators on the HMI do not always show ON when they should. Another vendors system and my Flow rate indicate motors are running. The monitored inputs from the PLC would have to be on before the rate calculations are made, or are supposed to be. I have not seen the problem myself, but I have no reason to doubt what he says. Any thought about what may be happening in my programming?
The operator has stated a couple times now that the indicators on the HMI do not always show ON when they should. Another vendors system and my Flow rate indicate motors are running. The monitored inputs from the PLC would have to be on before the rate calculations are made, or are supposed to be. I have not seen the problem myself, but I have no reason to doubt what he says. Any thought about what may be happening in my programming?