andydaoust
Member
Hi Everyone,
I'm building a glass kiln. It will be a multi-segment temperature controller. I'm using an SLC 500 5/04. I'll probably buy a 5/05 for ethernet. I don't need the Panelview software and hardware to interface with the PLC. I can use RS Logix. I would however, like to set up the home computor so my wife could enter a temperature profile and monitor the kiln from inside the house. I thought there might be an inexpensive HMI as compared to the Panel View setup. I searched for HMI; there were many hits. Maybe you could help me narrow my focus.
Thanks,
Andy
I'm building a glass kiln. It will be a multi-segment temperature controller. I'm using an SLC 500 5/04. I'll probably buy a 5/05 for ethernet. I don't need the Panelview software and hardware to interface with the PLC. I can use RS Logix. I would however, like to set up the home computor so my wife could enter a temperature profile and monitor the kiln from inside the house. I thought there might be an inexpensive HMI as compared to the Panel View setup. I searched for HMI; there were many hits. Maybe you could help me narrow my focus.
Thanks,
Andy
Last edited: