Hi guys
I have a system of mp277 key hmi, s7-300 plc
Hmi has damage, so I bought weintek hmi to replace it
I have the cpu program so I got the tags and every thing is good except the Input field for the address for example DB18. DBD54, if I put 2 I get 20000 in cpu through monitor mode I have tried to change the format to 32bit flot, 32bit unsigned, 32bit hex, 32bit BCD, with no luck,
Hope u fine
Thanks
I have a system of mp277 key hmi, s7-300 plc
Hmi has damage, so I bought weintek hmi to replace it
I have the cpu program so I got the tags and every thing is good except the Input field for the address for example DB18. DBD54, if I put 2 I get 20000 in cpu through monitor mode I have tried to change the format to 32bit flot, 32bit unsigned, 32bit hex, 32bit BCD, with no luck,
Hope u fine
Thanks