hello to all genuis ...
i M having some problem with HMI via PC ..
1) cant start any equip by PC..example when
press start converyor it didnt work
2) some of Graphis on PC are missing ..example
Bin's and motor..
3) how i could edit this missing graphics
back to system.
using seimens PLC ..
PC are using window vista ..
i had swap with new com cable between the PLC and PC
thanks
i M having some problem with HMI via PC ..
1) cant start any equip by PC..example when
press start converyor it didnt work
2) some of Graphis on PC are missing ..example
Bin's and motor..
3) how i could edit this missing graphics
back to system.
using seimens PLC ..
PC are using window vista ..
i had swap with new com cable between the PLC and PC
thanks