how programing a plc siemens s5 948

[israel cerzar]

first experience in programming a analogica card of plc 948 is my siemens, and I do not have experience in programming a analogica signal, especificamente a hidruaulica valve proportional Vickers, some of you me cant you to indicate that steps to follow, to be able to obtain my objective, greetings

 

[Fritz_frederix]

Hi,

I think it's better that you take the manual, it's explained in there with an example. If you do a search on this site you'll find one. For the programming you'll have to make use of special FBxx. I forgot which one.

Rudi