How To Connect Various Brand Of Plcs To Rsview32

M. HASSAN

Member
M
Join Date
Oct 2004
Location
KARACHI
Posts
6
PLEASE HELP ME IN FINDING THE SOLUTION OF THE FOLLOWING PROBLEM.
THERE ARE FOUR PLCS, OUT OF WHICH THREE ARE SIEMEN'S S7-300 AND FOURTH IS ALLEN BRADLEY'S SLC5/03. EACH PLC HAS ITS OWN OPERATOR PANEL. I HAVE RSVIEW32 & I WANT TO ULITIZE THIS HMI. HOW I CAN CONNECT ALL FOUR PLCS TO A PC ON WHICH RSVIEW32 IS RUNNING.
 

Similar Topics

Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
64
Zubairjaved786
Z
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
340
JesperMP
JesperMP
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
122
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
153
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
373
TheColt46
T
Back
Top Bottom