mike4766 Member M Join Date Sep 2015 Location corpus christi Posts 15 Oct 15, 2015 #1 i want to know whether i can connect RS-485 and HMI using a Ethernet Cable via RS-485 port on Hmi .if i can i want to know how . thank you
i want to know whether i can connect RS-485 and HMI using a Ethernet Cable via RS-485 port on Hmi .if i can i want to know how . thank you
rdrast Lifetime Supporting Member Join Date Apr 2003 Location South Carolina Lowcountry Posts 5,544 Oct 15, 2015 #2 I want to build an airplane. with toothpicks.
Mickey Lifetime Supporting Member Join Date May 2003 Location Palmdale,Ca Posts 10,659 Oct 15, 2015 #3 A picture is worth... pick one. https://www.google.com/search?q=how...0CFAQsARqFQoTCJHahcXtxMgCFRfpYwodx4YIRg&dpr=1
A picture is worth... pick one. https://www.google.com/search?q=how...0CFAQsARqFQoTCJHahcXtxMgCFRfpYwodx4YIRg&dpr=1
bernie_carlton Lifetime Supporting Member + Moderator Join Date Apr 2002 Location Yakima, Washington Posts 6,413 Oct 15, 2015 #4 If this is the same question as yesterday please just continue with that thread by posting at the end of it.
If this is the same question as yesterday please just continue with that thread by posting at the end of it.
mike4766 Member OP M Join Date Sep 2015 Location corpus christi Posts 15 Oct 19, 2015 #5 Can i use my hmi as master to poll from Slave device?? how should I program it in RS-485 comms port on crimson 3.0 thank you
Can i use my hmi as master to poll from Slave device?? how should I program it in RS-485 comms port on crimson 3.0 thank you