hi i have a baumer vision unit picking up a QR code this is connected to a siemens 1200 plc.
i have a IB18 In the device that is the start of is result data , the code i have just scanned tell me its 8 bytes long
i have created a udt file with an array (32bytes) and added to a db
how do i get to transfer the vision data from IB18- IB26 (IF THATS THE 8 BYTES) In to the array and on to a display , the biggest qr code i think they need is 9 characters with letters and numbers.
my issue is understanding how to move the data .
so a recap if im right , the start of the result data is on IB18 the qr code tells me its 8 bytes on the software so im thinking byte IB26 will be the end ?
ive attached a picture of the array and a picture of the watch table with the IB18 Showing
then moving that data into the arrays and back to a string or what ever the end value is ,is where im stuck and need your help
can one of you kind people point me in the right area please
thank you in advance stu
i have a IB18 In the device that is the start of is result data , the code i have just scanned tell me its 8 bytes long
i have created a udt file with an array (32bytes) and added to a db
how do i get to transfer the vision data from IB18- IB26 (IF THATS THE 8 BYTES) In to the array and on to a display , the biggest qr code i think they need is 9 characters with letters and numbers.
my issue is understanding how to move the data .
so a recap if im right , the start of the result data is on IB18 the qr code tells me its 8 bytes on the software so im thinking byte IB26 will be the end ?
ive attached a picture of the array and a picture of the watch table with the IB18 Showing
then moving that data into the arrays and back to a string or what ever the end value is ,is where im stuck and need your help
can one of you kind people point me in the right area please
thank you in advance stu
Last edited: