How to reset G120 fault over ProfiNet?

#CRW is Output type ctrl word
#CONTROL.ACK_FAULT is bit 1.7 of DIW18 (in STAT) [remember Simatic byte order!]

Part of FB:

ack.jpg
 
Last edited:

Similar Topics

B
No timer reset
Hello, I still do not have equipment in to test. But the RTAC ladder does not have a timer reset coil. I wonder if a reset coil on Timer.IN is...
Replies
1
Views
122
drbitboy
drbitboy
N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
60
nadeem2nazar
N
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
394
John Lee
J
D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
99
Data_name
D
moistcat
Factory Reset 4RF Aprisa SR+
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure. Issue is that they are used and have non-default...
Replies
0
Views
107
moistcat
moistcat
Back
Top Bottom