How to reset multiple AB counters easily

Doug-P said:
You could set the ACC to any value but that doesn't address (no pun intended) the issue of the DN bits. To take care of those also you'd need the RES instruction, which does both.

Someone jump in if I'm wrong about this.
Click to expand...

If a counter is done and you move a value less than the preset, the .DN bit will turn off.
 

Similar Topics

N
Reset Multiple Control Blocks
Is there a way to reset 1 CONTROL Tag with 120 Arrays. DecMoveHeight[0]-[119] with one instruction? If so how is it structured. This is with...
Replies
10
Views
3,368
daba
D
rajy2r
FactoryTalk View ME - Reset Multiple PLC Alarms
Is it possible to reset alarms on multiple PLC's by using one button on the FactoryTalk View ME screen. Each PLC has an independent reset bit, so...
Replies
1
Views
3,153
val_99
V
B
No timer reset
Hello, I still do not have equipment in to test. But the RTAC ladder does not have a timer reset coil. I wonder if a reset coil on Timer.IN is...
Replies
0
Views
1
BeepBob
B
N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
39
nadeem2nazar
N
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
351
John Lee
J
Back
Top Bottom