I have a project that is using a compactlogix 1769-if4,1769-of4c1 cards. I am using rslogix 5k v15.02. I do not have the function block editor pack. Currently the analog input cards are set for 0-10vdc in raw/proportional, the raw data reads 0@0vdc, 32117@10vdc input, while the analog output reads 12ma@0vdc input, and 20ma@ 10vdc. To get a 4ma ouput I have to write in -32000 to ouput. I have read all the post from search. But I just can't seem to wrap my mind around this. Any help is appreciated.
input raw data output ma raw data
0vdc 12ma 0
10vdc 20ma 32117
input raw data output ma raw data
0vdc 12ma 0
10vdc 20ma 32117