Is it possible to scale Analog input Using AB IR-1762...?
- Thread starter JBSK
- Start date
Mickey
Lifetime Supporting Member
The 1762-IR4 is a RTD/Resistance input module.
The Raw data from the card will depend on the type of input (RTD type) and/or resistance value connected to the module. Also how you configure the raw data format.
See link to the manual..
https://www.google.com/url?sa=t&rct...y_8WtWEm7bSlxuXhg&sig2=Oe1eAxL_iUVkYdBBloJN1g
The Raw data from the card will depend on the type of input (RTD type) and/or resistance value connected to the module. Also how you configure the raw data format.
See link to the manual..
https://www.google.com/url?sa=t&rct...y_8WtWEm7bSlxuXhg&sig2=Oe1eAxL_iUVkYdBBloJN1g
Similar Topics
Hello All,
I need the ability to remotely reboot a Red Lion CR3000 HMI. Due to some graphics issues when the database is updated the HMI must be...
Hello
The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run?
I do not wanna...
Folks,
I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Hi all so i have a robot project im working on were i need to set the layers. using the hmi screen i would like to use the numeric data display to...
I have a FactoryTalk View Se project, Is it possible to export Direct Reference tags to edit in a CSV file or Excel?
I know I can export HMI...
