how to set dial node on etn21

[Crimsonmaster]

how to set dial node on etn21

 

[widelto]

What is etn21 ??

 

[Crimsonmaster]

yes I have an OMRON ethernet card ETN21 and I am trying to set up to a cj1h OMRON plc, after connecting I can ping the ip address of the card but the ERH light is solid red, which means the node number is not set right. The ip of the card is 10.176.214.156 and the subnet is 255.255.255.128

 

[Crimsonmaster]

I just havent't figure it out where the x16^0 and x16^1 dials need to be set to

 

[RoTaTech]

The three dials need to be set to the last octet of your IP address, converted to hexadecimal. 156 decimal = 9C hex.

 

[RoTaTech]

The TWO dials need to be set to the last octet of your IP address, converted to hexadecimal. 156 decimal = 9C hex.

Two.