How to set special flash...?

SOURCE

Member
S
Join Date
Nov 2013
Location
Ayutthaya
Posts
19
Dear : every one
I have project about contact plc xinje xc3 series to another hardware with
RS485 port (Free format communication) But i cannot set FD8220 to 255(HFF)
This is a special flash. and i don't know how to take it...?
If possible...Help me please..
 

Similar Topics

B
No timer reset
Hello, I still do not have equipment in to test. But the RTAC ladder does not have a timer reset coil. I wonder if a reset coil on Timer.IN is...
Replies
1
Views
94
drbitboy
drbitboy
N
DVP-14SS2 program does not Run after Power Reset
Hi, i am using DVP-14SS2 PLC, after program written to plc, when power is reset, plc doesn't run. always need to connect to pc for the run mode.
Replies
0
Views
40
nadeem2nazar
N
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
363
John Lee
J
K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
107
Ko Lin
K
D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
94
Data_name
D
Back
Top Bottom