HSQ RTU Non-Proprietary Support

NewToHSQ

Member
N
Join Date
Jul 2012
Location
Virginia
Posts
8
Has anyone used an HSQ RTU with an open system such as Wonderware or iFix?

We are getting ready to upgrade our SCADA and are looking at a more COTS implementation.
 

Similar Topics

A
Need some HSQ Technology RTU Help
I'm not very familiar with HSQ RTUs so I need some help if anyone can give it. I have an RTU that keeps cycling off to where I have to cycle the...
Replies
0
Views
530
ARYankee
A
P
PLCs with HSQ SCADA
Has any one used PLCs with MODBUS on HSQ SCADA systems? Any lessons learned?
Replies
1
Views
2,275
mbracanovic
M
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
72
Zubairjaved786
Z
A
Error 36 in microwin modbus rtu
Dear All, i am trying to connect Danfoss inverter with s7 200 cpu 226.but microwin shows following error at DATA Ptr.i assigned different VB...
Replies
1
Views
63
BryanG
B
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
271
Jkoso
J
Back
Top Bottom