plc_novice
Member
Has any one used PLCs with MODBUS on HSQ SCADA systems?
Any lessons learned?
Any lessons learned?
PLCs with HSQ SCADA
- Thread starter plc_novice
- Start date
mbracanovic
Member
HSQ SCADA and PLC's
I have HSQ SCADA currently configured with HSQ RTU's,PLC5, RSlogics 5000, Modicon PLC an Novatech RTU's.
I have no issues with it and it's working just fine.
HSQ Technology provided us with NCC driver.
Here is the link. http://www.hsq.com
I have HSQ SCADA currently configured with HSQ RTU's,PLC5, RSlogics 5000, Modicon PLC an Novatech RTU's.
I have no issues with it and it's working just fine.
HSQ Technology provided us with NCC driver.
Here is the link. http://www.hsq.com
Similar Topics
I've been dealin with some intermittent CIP explicit messaging issues. I tried reducing the amount of small MSG instructions and converted them to...
What's the best way to connect with more suppliers?
I'm at a new job as the sole control engineer and trying to piece together where my predecessor left off. One machine I'm trying to get online...
Or there is an alternative to this? I suppose there are many but I've only seen put/get
Can you for example set up a new plc and connect it to an...
I have a client who periodically experiences network communication issues. Sometimes when I VPN into the site, their SCADA systems will flash comm...
