I'm a newbie on PLC's and this will be my first project and considering buying an AB 1764LRP ML 1500 RS-232 Processor and a AB 2711PT6C5A 6" color touch display using Factory Talk Studio for Machine Edition and RSLogix 500.
Input: Vacuum, Pressure and Heat transducer 4-20ma.
Question: I don't know if the above hardware/software will be good for this project?
The project is to control heat, pressure and time duration for each curing step. Some parameters need to be entered for every job.
Example:
Step #1
a. pressure = 90psi
b. temperature = 0
c. time = 5 mins
Step #2
a. pressure = 90psi
b. temperature = 300 deg
c. time = 90 mins
Step #3
a. pressure = 90psi
b. temperature = 180 deg
c. time = 20 mins
Step #4
a. pressure = 0psi
b. temperature = 0 deg
c. time = 20 mins
Cycle complete
Appreciate all feedbacks,
Thanks TioPaeng
Input: Vacuum, Pressure and Heat transducer 4-20ma.
Question: I don't know if the above hardware/software will be good for this project?
The project is to control heat, pressure and time duration for each curing step. Some parameters need to be entered for every job.
Example:
Step #1
a. pressure = 90psi
b. temperature = 0
c. time = 5 mins
Step #2
a. pressure = 90psi
b. temperature = 300 deg
c. time = 90 mins
Step #3
a. pressure = 90psi
b. temperature = 180 deg
c. time = 20 mins
Step #4
a. pressure = 0psi
b. temperature = 0 deg
c. time = 20 mins
Cycle complete
Appreciate all feedbacks,
Thanks TioPaeng