I/O Configuration

pino2003fr

Member
P
Join Date
Nov 2006
Location
NJ
Posts
73
hello, everyone i have OPTICAL COMMUNICATION model OLC-DSL-85-D-ST
can someone tell how config the I/O card on SLC 5/03 , i don't have drive for it
thanks in advance

Capture.PNG
 

Attachments

  • Rockwell.pdf
    251.6 KB · Views: 4

Similar Topics

O
Micromotion 1700 Configuration
I've been fighting with a Micromotion 1700. Can't get into the configuration area. It's as if the optical sensors are disabled or locked out...
Replies
1
Views
55
tdoa
T
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
69
dmroeder
dmroeder
A
Kinetik 300 -2097-V33PR3 Master and Slave Configuration
Hi i using Kinetik 300 2097 driver control by EIP with using move absolute and incremental for motion , but i want to add same driver and motor as...
Replies
0
Views
74
Ansonkiek
A
A
45DMS-B8LAT1-D4 configuration
Hello I have a sensor that I read data with IO-LINK but I don't know how to get my data. I see that I have two modes : Process data Map0 and Map...
Replies
0
Views
76
ahmeduqat
A
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
118
Kataeb
K
Back
Top Bottom