I have a Keyence light curtain, SL-V32HM that is wired to an IB8S in an AENTR. I have the discrepancy time in the IB8S set at 100 ms. The response time for the light curtain is from ON-OFF is 10.3 ms and from OFF-ON is 50.3 ms.
The inputs on the input card keep faulting out, turning red. Anything other than the discrepancy time in the IB8S that I should be looking at? Any thoughts on this?
Thanks in advance.
The inputs on the input card keep faulting out, turning red. Anything other than the discrepancy time in the IB8S that I should be looking at? Any thoughts on this?
Thanks in advance.