Idec F2AJ lad file to Windldr ldr conversion

DJ@greenlinepower

Member
D
Join Date
May 2013
Location
Surrey B.C.
Posts
1
Have old F2AJ plc to replace with FC4A upgrade. Chatted with Idec and researched manuals to find no solution. Opening "Workfile.LAD" file with Windldr does not recognize .LAD files. F2Aj plc may have "bug" in memory so may be unreliable for hardwired download. Anyone had this experience or found a solution??
 

Similar Topics

Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
94
Voltimus
Voltimus
G
Connect HMI DELTA with PLC IDEC via RS 232C/485
I'm trying to establish communication between an HMI DELTA (DOP-B07E515) and a PLC IDEC (FC6A-D16R1CEE) via the RS-232C/485 module (FC6A-SIF-52)...
Replies
2
Views
581
gide007
G
J
Modbus TCP & CT(Nidec)
Has anyone interfaced a PLC with a Control Techniques drive Nidec 750 using Modbus TCP? I am attempting to do so using an Automation Direct...
Replies
2
Views
904
L D[AR2P#0.0]
L
J
Idec PLC Upgrade - FC5A to FC6A
I'm involved in upgrading an IDEC FC5A-D12S1E PLC to a FC6A-D32P3CEE. I've attached the original layout of the system. Since then, another HG3G...
Replies
0
Views
448
johnd_125
J
H
Idec PLC FA 2J
Hallo all, We are servicing machine automation using PLC Idec FA 2J. I'm trying looking for the PLC user manual, but till now didn't get at all...
Replies
1
Views
793
JBooth
J
Back
Top Bottom