Idec PLC FA 2J
- Thread starter Heruyana
- Start date
JBooth
Member
Check out this thread: http://www.plctalk.net/qanda/showthread.php?t=11276
Similar Topics
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
I'm trying to establish communication between an HMI DELTA (DOP-B07E515) and a PLC IDEC (FC6A-D16R1CEE) via the RS-232C/485 module (FC6A-SIF-52)...
I'm involved in upgrading an IDEC FC5A-D12S1E PLC to a FC6A-D32P3CEE. I've attached the original layout of the system. Since then, another HG3G...
I have a customer with an Idec FC5A-D12S1E processor. They want to add a few I/O. Yes, this PLC and its output modules are obsolete and thats...
Hi there,
I have a project that need to use IDEC FC6A modbus to control a VFD which is Lenze SMVector.
I'm new to PLC and never done...