AhmedMOLO
Member
Hi everybody,
I have DELTA PLC DVP-32ES and I have make a simple project in WPLSoft. using the input X0 to switch ON the output Y0 and using the input X1 to switch OFF the output Y0.
Till now everything is correct. I downloaded the ladder program to the PLC.
The program works well. except when I try to set on the input X0 in the online mode, the message "Illegal data address; Dependant on the request(Error code=2)" appears.
And even I try to switch it on the HMI, a message "Write Error Address Fault..." appears on the HMI.
Please can someone help me.
I have DELTA PLC DVP-32ES and I have make a simple project in WPLSoft. using the input X0 to switch ON the output Y0 and using the input X1 to switch OFF the output Y0.
Till now everything is correct. I downloaded the ladder program to the PLC.
The program works well. except when I try to set on the input X0 in the online mode, the message "Illegal data address; Dependant on the request(Error code=2)" appears.
And even I try to switch it on the HMI, a message "Write Error Address Fault..." appears on the HMI.
Please can someone help me.