Well I got the wait commands to work, thank you!
But the tool changer is still not reliably changing to the correct tool...I don't think mach 3 can handle this properly (thats the controller)...
Heres a video
https://www.youtube.com/watch?v=sK_UEFM9VtQ
Would you be able to select the one for me?
So I have decided to go with a PLC, I would need at least 9 inputs 12vdc, and 3 outputs 12vdc. There are so many CLICK PLC's would you be able to assist me in my selection?
Thank you!
I know with hours and hours of figuring it out, I might be able to get the controller to work. But I really want to learn PLC for many of my future projects, so this would be a great learning time !
Thanks you!
But the tool changer is still not reliably changing to the correct tool...I don't think mach 3 can handle this properly (thats the controller)...
Heres a video
https://www.youtube.com/watch?v=sK_UEFM9VtQ
Would you be able to select the one for me?
So I have decided to go with a PLC, I would need at least 9 inputs 12vdc, and 3 outputs 12vdc. There are so many CLICK PLC's would you be able to assist me in my selection?
Thank you!
I know with hours and hours of figuring it out, I might be able to get the controller to work. But I really want to learn PLC for many of my future projects, so this would be a great learning time !
Thanks you!