saultgeorge
Lifetime Supporting Member
Hi folks.
I have been reading the FTV user manual for most of the morning and it doesn't say much about visibility of images.
I have images in the images folder for the project. This is FTV ME v. 12. The image I want to use is showing on the display on my laptop however it doesn't show on the screen on the HMI. I've tried loading and running the .mer file again, refreshed comms-about everything that seems logical. There is only a blue area on the HMI where the image is supposed to be.
The image is of a part we are welding nuts onto and we are showing weld completes and status for every weld. Those show up fine as the welds continue.
Perhaps it's something really obvious however I'm becoming non-productive looking through this. Any suggestions are appreciated!
I can post the .mer if needed. The photo is what I see when the HMI is running. The screenshot is what I see on the laptop and what I need to see on the HMI. Thanks.
I have been reading the FTV user manual for most of the morning and it doesn't say much about visibility of images.
I have images in the images folder for the project. This is FTV ME v. 12. The image I want to use is showing on the display on my laptop however it doesn't show on the screen on the HMI. I've tried loading and running the .mer file again, refreshed comms-about everything that seems logical. There is only a blue area on the HMI where the image is supposed to be.
The image is of a part we are welding nuts onto and we are showing weld completes and status for every weld. Those show up fine as the welds continue.
Perhaps it's something really obvious however I'm becoming non-productive looking through this. Any suggestions are appreciated!
I can post the .mer if needed. The photo is what I see when the HMI is running. The screenshot is what I see on the laptop and what I need to see on the HMI. Thanks.
Last edited: