michealmurphy3264
Member
Hi,
In Mitsubishi you can use the index register to change a device number, e.g.:
z2 := 2;
M2Z2 :=0; (*i.e. sets M2+2, M4 = 0*)
Does anyone know if you can use this with bit number addresses, i.e.
D0.1 , then shift to access D2.1 or D0.3.
This would be very useful as i'm trying to convert from S7 to MELSOFT. Any help would be much appreciated...
Thanks
In Mitsubishi you can use the index register to change a device number, e.g.:
z2 := 2;
M2Z2 :=0; (*i.e. sets M2+2, M4 = 0*)
Does anyone know if you can use this with bit number addresses, i.e.
D0.1 , then shift to access D2.1 or D0.3.
This would be very useful as i'm trying to convert from S7 to MELSOFT. Any help would be much appreciated...
Thanks