Hello everyone,
I need to install a level sensor in an existing plastic tank. It will go on top and there will not be pressure on it except if it overfilled which may happen occasionally.
The issue is that what ever fitting I will use has to be installed from outside only, no access to the inside of the tank. What options are out there aside from spin fitting.
I need to install a level sensor in an existing plastic tank. It will go on top and there will not be pressure on it except if it overfilled which may happen occasionally.
The issue is that what ever fitting I will use has to be installed from outside only, no access to the inside of the tank. What options are out there aside from spin fitting.