Actual time is not being input, a 24vdc input is from each of the air compressors signals only when they are loaded. Each of those run a timer and the accumulation of that timer was being messaged to the Contrologix plc. All the other logic was set up in that plc.
INT and DINT
- Thread starter pkb01
- Start date
Similar Topics
Hi
I am being given several fault words (as a DINT) from a Drive that I am receiving into a Compactlogix L33ER controller. I have a small...
I am working on a project with a Controllogix 5582 processor using v32 firmware where I will be communicating with a Genset using Modbus TCP. It...
Hi!
It is always said, that DINT is the most performant datatype in AB plcs.
I while ago i made a performance test. Several instructions like ADD...
Im trying to use a MSG instruction to get the serial numbers of all addon cards and display the serials on a HMI interface. I have the logic done...
Just something I think about when choosing data types in Studio 5000. It seems logical, but I've never looked deeply into the question.
When...