interfacciare PLC S5 con HMI 2a Gen. Siemens tramite IBH Link S5++

Matteo salerno

Member
M
Join Date
Mar 2024
Location
limbiate
Posts
1
Buona sera,
Ho dei problemi nell' interfacciare PLC S5 con HMI 2a Gen. Siemens (ad esempio KTP400) tramite IBH Link S5++.
il mio obbiettivo è solo quello di visualizzare i possibili allarmi.
Ho già configurato come esempio del produttore IBH Link S5++ ma come risultato nessuna comunicazione.
Precisando che l'esempio era solo mostrato con WinCC flessibile mi viene il dubbio che non si possa fare con HMI programmi con TIA.
Grazie in anticipo per l'attenzione
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
181
mburtis
M
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
5
Views
186
geniusintraining
geniusintraining
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
40
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
249
bkottaras
B
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
Back
Top Bottom