Hi, i'm new here so please don't scold me. 
I'm using Intouch 10.0.0 and trying to model an altitude meter with pitch and roll like in this link: https://cdn.instructables.com/FEA/FND4/JGGTF9IS/FEAFND4JGGTF9IS.LARGE.jpg
and also a compass symbol
I'm going to get the signal of the gyroscope from RS232 through a PLC module.
1. My problem is how can i generate the symbol and how to program it to get the input from the PLC.
2. If i have a bundle of data from PLC and i want to send them out as a data string from Intouch to another PC through a serial port, can someone teach me how to do it?
Example:
Depth : dddd.dd
Altitude: dddd.dd
Heading: dd.d
So, when i want to send them out from the intouch, the data string may look like this: dddd.dd,dddd.dd,dd.d
I'm using Intouch 10.0.0 and trying to model an altitude meter with pitch and roll like in this link: https://cdn.instructables.com/FEA/FND4/JGGTF9IS/FEAFND4JGGTF9IS.LARGE.jpg
and also a compass symbol
I'm going to get the signal of the gyroscope from RS232 through a PLC module.
1. My problem is how can i generate the symbol and how to program it to get the input from the PLC.
2. If i have a bundle of data from PLC and i want to send them out as a data string from Intouch to another PC through a serial port, can someone teach me how to do it?
Example:
Depth : dddd.dd
Altitude: dddd.dd
Heading: dd.d
So, when i want to send them out from the intouch, the data string may look like this: dddd.dd,dddd.dd,dd.d