Hi
Does anyone have any experience with the ADFweb.com J1939 to Modbus RTU gateway? I have a test interface program on a PLC and HMI and connected it to an International engine. It appears that the Modbus interface is working but the Canbus is not. I had a scope connected to the Can h and Can L and have data coming out of the J1939 bus but the ADF bridge is capturing the packets.
Or any info on other gateways that are cost effective and work?
Thanks
Bob
Does anyone have any experience with the ADFweb.com J1939 to Modbus RTU gateway? I have a test interface program on a PLC and HMI and connected it to an International engine. It appears that the Modbus interface is working but the Canbus is not. I had a scope connected to the Can h and Can L and have data coming out of the J1939 bus but the ADF bridge is capturing the packets.
Or any info on other gateways that are cost effective and work?
Thanks
Bob
Last edited: