Jthornton Question

PERSPOLIS said:
HI

CAN YOU EXPLAIN THESE TERMINOLOY :
Cylinder Idle S1 S2 S3
Minor In Out In Out
Major Out In Out Out

MANY THANKS

There are two air cylinders the Minor Flap Cylinder and the Major Flap Cylinder. Each has two states In (retracted) or Out (extended)
When both cylinders are in state 0 (idle) or State 1, or State 2 or State 3 their positions are as in the grid above.
 

Similar Topics

I have a 120V relay, 120V DI card and a analog input. I was wanting to know if i could put a 24V DI and well as a 120V DI card on the same plc...
Replies
1
Views
89
Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
197
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
4
Views
195
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
108
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
115
Back
Top Bottom