Kinet 300

AndrewFord316

Member
A
Join Date
Mar 2024
Location
Nashville
Posts
2
We have a AB Kinet 300 that went bad on us. I bought a new one and put the original memory chip in it. It’s all powered up and showing the ip address but is also showing dis for disabled. I know nothing about PLC programming or how to configure a drive . Is this something simple or should I contact someone who does this work ? Please help.
 

Similar Topics

O
Kinet 300 to Micrologix 1400
Anyone have any experiance with connecting a A/B Kinet 300 to a Micrologix 1400 PLC. I need help doing this, it is new to me and haveing a rough...
Replies
3
Views
1,602
osmanmom
O
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
34
andyvanosdol
andyvanosdol
A
I/O access error on S7-300
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
174
JesperMP
JesperMP
B
Kinetix 5300 MSO causing ExcessiveVelocityErrorFault
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
144
padees
P
O
Re-Zero a Kinetix 5300/MPAI Electric Cylinder
Hello PLCS.Net Forum, First time posting. Let's assume I am a novice. BASIC PROBLEM: My servo/linear piston is no longer zeroed to the...
Replies
9
Views
218
OhNo
O
Back
Top Bottom