Kinetics 5500 Logic
- Thread starter trappc07
- Start date
Rockwell has a few examples on the PCDC page
Here https://compatibility.rockwellautomation.com/Pages/home.aspx
Click on the Sample Code link on the left side of page and search Standard Motion Starting Point.
This is a very basic example ADC
Here https://compatibility.rockwellautomation.com/Pages/home.aspx
Click on the Sample Code link on the left side of page and search Standard Motion Starting Point.
This is a very basic example ADC
Similar Topics
{Old Indramat guy here} (*)
How do you 'jumper out', logically, a drive on a Kinetics 6000?
For example, I have a Power Module (Node 20) and...
Working on a machine we recieved that has a compact logix plc and kinetics servo and trying to get a better understanding in order to make some...
I'm fairly new to working with servo control. My training is coming, but I have a customer that needs help right now, so I'm trying to read/work...
Good Afternoon ,
I need to wrap my head around programming Rockwell Automation Kinetic Servo drives. Would you folks have any training...
Hi. I have an application where I need 2 servo motors that are mechanically linked to run a gear box (motor A is connected to motor B via 2...