Kinetix 5500 easy question

Bolatov

Member
B
Join Date
Jun 2010
Location
Mty
Posts
87
I would like to do change a kinetix drive, so i believe i just have to put the IP address in the new kinetix and just connect right?

Do I need to tune this new drive after it?
 

Similar Topics

W
Brake Control Kinetix 5500
Hi all, I am upgrading a couple of 2094-BC01-M01 servos with 2198-H015-ERS. The original code uses MSG instructions to control (release, engage...
Replies
2
Views
74
DarrylR
D
T
Kinetix 5500 issue
Hello everybody, I have Kinetix 5500 (2198-H040-ERS). I'm having issue with this drive. (I believe it's the drive/Kinetix and need confirmation)...
Replies
0
Views
60
tjntjntjn
T
J
Kinetix 5500 DCBusUnderVoltageFactoryLimit
Good day: I am wondering if anyone has experience with the Kinetix 5500 S33 Fault. I have 3 drives in a group set as follows: 2198-H025-ERS2...
Replies
5
Views
189
JamesCash
J
dvanovec
Kinetix 5500 - DCBusUpStatus
Hi guys! I have 3 servos for X,Y,Z axis controlled by Kinetix 5500. In Studio 5000 there is one Predefined tag in AXIS_CIP_DRIVE called...
Replies
4
Views
202
dvanovec
dvanovec
W
Issues with Servo Motor Stopping ( Kinetix 5500 )
Hi all, New here and new all round to PLC`s. We have a servo drive that runs a cross travel beam backwards and forwards. I am having trouble with...
Replies
3
Views
253
robertmee
R
Back
Top Bottom