I See The Tree ??
RON Well even if you had you dun lit the lite and I see the lite of day.
rsdoran said:Open the project for the 5/05 then goto I/O configuration and double click on it
A window will open with I/O modules listed scroll down to the HSTP1 then double click it and it will place it in the I/O list on left.
RON we got as far as above
If you double click on the Stepper module once its in list a property window will open:
REPLY I have found our mistake. We did not get this screen.
Ignore the fact that its listed in Slot 1 but properties state Slot 3...I was playing around and changed the slot. I assume you are aware that addressing is based on the slot.
Hot dawg I didnt get beat to the punch this time.
RON Well even if you had you dun lit the lite and I see the lite of day.