Hey guys, I'm using version 10.00.00 (CPR 9) or RSlogix500. The main processor I talk to is a SLC 5/05. I was recently told about the "logic trace" feature and was wondering why it is grayed out in my situation? I added it to my toolbar via View>toolbars>checked the box next to logic trace. It shows up now, just grayed out. Thanks in advance for any assistance!
"logic trace" function grayed out
- Thread starter artem
- Start date
bjh
Member
I think you need a RSLogix 500 PRO license in order to use this feature. Besides those with toolkits I'd bet that 99% of licenses in the wild are RSLogix 500 Standard.
Similar Topics
Hi friends,
Can anyone elaborate on the " Logic trace functionality"
and "cross reference navigation" features in RS Logix?
These are new...
Any one give solution for this fault.
We are using AB Gaurd logix controller(5573s), resent days we are facing major fault in controller...
Hello,
I am going over some old code from days gone by. I would like the expert to confirm my findings to see if I got it correct.
1. B64:22/3...
Hello, I´m having a problem trying to program in Ladder. An output should be trigged by two possible contacts. Take a look on the printscreen...
I got my PanelView Plus 7 working with a Micrologix 1500. How would I connect my laptop to the PanelView to view the ladder logic while operating...