JohnKhoury28
Member
I have just completed the Traffic Light Control with a delayed green light. What I am asking here is if my rung comments are easy to follow for another engineer to pick on and bluid on top of it and/or if it clear enough for a shop maintenance personnel to follow if it was every applicable. How is the wording?
What else do you recommend as a criteria to meet for the traffic light lab simulation with Prologix500 using the relay contact method? I have already done the first exercise using the word comparison method.
Do you have any inspirational ideas for taking the technique from this lab exercise to actual hardware and lights for a different application? I own a Micrologix1100 and 4 pilot lights and two selector switches as will as detection switch.
Please see the attached. jpg file for the rung comments. Have a wonderful week. Thank you for your time.
What else do you recommend as a criteria to meet for the traffic light lab simulation with Prologix500 using the relay contact method? I have already done the first exercise using the word comparison method.
Do you have any inspirational ideas for taking the technique from this lab exercise to actual hardware and lights for a different application? I own a Micrologix1100 and 4 pilot lights and two selector switches as will as detection switch.
Please see the attached. jpg file for the rung comments. Have a wonderful week. Thank you for your time.
Last edited: