i am having issues keeping communications set up with my plc. so my slc 5/05, c-more touchscreen, and computer were all communicating properly when i left yesterday, but this morning the hmi and the plc will not communicate at all. this is not the first time it has done this. the processor cannot be found by rs linx nor the computer. i tried to ping the ip address but nothing comes back. the computer will recognize the hmi but rs linx dosent, i keep getting a yellow question mark saying its unrecognized. i am connected via ethernet and using a ethernet switch to chain the components. its beginning to be a pain in the rear having to reestablish communications every time and i am getting ready to send this out and they will be powering the system down at night. is there a way to keep the communications active forever? and if so how???
thanks in advance
thanks in advance
Last edited: