jrexrode
Member
I have a question concerning automatic reset vs. manual reset of a safety relay.
I'm wondering if configuring the relay for automatic reset lowers the SIL level, even if the switch wiring is the same as if it were configured for manual reset. I'm using the following diagram as a reference.
I'm thinking that automatic vs. manual should make a difference, but I have no info to back it up.
I'm wondering if configuring the relay for automatic reset lowers the SIL level, even if the switch wiring is the same as if it were configured for manual reset. I'm using the following diagram as a reference.
I'm thinking that automatic vs. manual should make a difference, but I have no info to back it up.