Meaasge Between a clx L61 and L61S

Donnchadh

Lifetime Supporting Member
D
Join Date
Jun 2002
Location
Ireland
Posts
1,004
Hi All

Has anyone set up a ethernet message between a CLX L61S processor and a L61 processor. Both are ver 19 and I am just
after any info that I should be watching out for.

Thanks to all (y)

Donnchadh
 

Similar Topics

A
The READ_VAR / WIRETE_VAR works between two Simulator Control Expert V14.1
I’m attempt to establish a communication between two simulator M580 CPUs, using a READ_VAR, I have two vitalization Windows 10 in VMWare and each...
Replies
0
Views
53
ahcoleho
A
S
Communication not done between Woodward controller and PhoenixIO
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Replies
0
Views
39
Sandeep Patel
S
P
Communication Between Compact Logix and Guard Logix Error
Hello Everyone, I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
Replies
4
Views
98
Ken Roach
Ken Roach
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
125
mk42
M
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
102
Chris3EC
C
Back
Top Bottom