controlled
Lifetime Supporting Member
I'm trying to use a message instruction to read the value from a PLC5/20 into another. I have searched the forum, but am getting more confused.
Each of the PLC's use Node 40 as the DH+ address. They are wired into a control logix gateway utilizing a dhrio card and a ENBT card. The network works great as it is (I can go online with both controllers, and I have factorytalk view reading data from both controllers.)
From what I have read, i believe i need to use multihop messaging, but when i try to enter the MSG parameters in RSlogix, it doesnt give me the multihop option.
Any help would be greatly appreciated.
Each of the PLC's use Node 40 as the DH+ address. They are wired into a control logix gateway utilizing a dhrio card and a ENBT card. The network works great as it is (I can go online with both controllers, and I have factorytalk view reading data from both controllers.)
From what I have read, i believe i need to use multihop messaging, but when i try to enter the MSG parameters in RSlogix, it doesnt give me the multihop option.
Any help would be greatly appreciated.