Received the following by PM, and posting it here to help others.
Came across some threads on here where you were active in with questions regarding Mettler's IND570 and integration into a Compactlogix controller.
Wanted to run something by you, attached are some screenshots of what I'm seeing.
Sample code from MT's website seemed to be in V20 of Studio 5000, I'm working in V32 currently. I had to email MT to get their AOP because I could not find it on their website. Once I received the AOP and added the device in V32 of Studio 5000 the controller tags available to me seem to differ from that of their own sample code, which again seemed to be in V20.
Specifically the .ConnectionFaulted tag that seeme to be present in most, if not all, other manufacturers tags when an AOP is involved within Studio 5000. The tag is there in V20 and their sample code, but not there with the AOP that I was sent.
Also, with these indicators if I am just looking to get the current weight value from the scale that now seems to be a controller tag from the AOP, so do I NOT need to send values TO the indicator in order to get the scales current value back anymore? Again their sample code, as well as their PLC interface manual, seems to show a different way of doing thing then what their new AOP has.