jeepmadmike
Member
- Join Date
- Mar 2005
- Posts
- 29
Hi all, i have a micrologics 1200 with a damaged relay contact and am trying to upload the existing program but am having issues with getting my laptop to connect to the PLC, it is usually connected to a HMI via com port is this what is causing me issues?
My RSlinx is linx lite if that makes any difference?
I'm using com1 on my pc which is a proper serial port and RSlinx driver im trying is AB_DF1-1 DH485.
I have contacted the guy who wrote the software and he was less than helpful but did mention it would need to be a DH485 driver?
would it be possible to use a epromm to swap the software? but i havent a clue how to do that!!
sorry for being a dim sparky (electricain) but i usually manage to solve my plc problems!
My RSlinx is linx lite if that makes any difference?
I'm using com1 on my pc which is a proper serial port and RSlinx driver im trying is AB_DF1-1 DH485.
I have contacted the guy who wrote the software and he was less than helpful but did mention it would need to be a DH485 driver?
would it be possible to use a epromm to swap the software? but i havent a clue how to do that!!
sorry for being a dim sparky (electricain) but i usually manage to solve my plc problems!